- PM-6750/M0 (reading the UID of mifare card).
- PM-6750/M1(reading the certain sector/block of mifare card).
- PM-6750 series products provide a fully featured hardware / firmware infrastructure for the access control system, which support stand-alone or intelligent PC on / off-line operation, and TCP/IP available with external converter.
- Most system parameters,personal map settings and status inquiry can be accomplished on this product independently or uploaded / downloaded via on-line PC, it also can be upgraded to support up to 15,000 card holders and 32,000 events(4Mb) buffer.
- Lots of derivative versions to cover ARM/DISARM, two man escort, patrol, card with validity date, separate Digital door driver ( DDR) and other customer special requested functions are reserved as optional functions to be ordered on OEM/ODM basis.
|
|
|
|
| Features︰ | Mifare Card Reader / Access Controller / Time & Attendance Recorder 3 in 1 design, supports stand-alone or intelligent PC on/off-line operation.Built-in reader module, and provides a standard Wiegand input for external reader (PUA-310/M, or PP-110/M) for in/out access control, and anti-pass back function, also comes with 24/36/48 hours anti-pass back reset function.(optional function)Support the reading of Mifare card (credit card size and easy for color printing) and Mifare keyfob.With 256kb nonvolatile memory for 6,000 cards and 8,000 events(expandable with 4 Mb flash memory for 15,000 card & 32,000 events) for 6-10 digits I.D. with 4 digits PIN, personal time zones, staff numbers and name. Operation modes: 1. card only 2. card and PIN 3.keying only (by card number and PIN) 4.auto operation mode by time zones 5. personalized operation mod(optional) 6.auto free accessCard can be added / deleted / inquired in single / block of range or by read & learning by manual operation or via PC.2 lines x 16 LCD for displaying system parameters and personal maps when setup or inquiry, such as: date, time, duty name, buffer counter, card number, and user name. And support printout for all events logging by connecting the serial output to PG-1050B printer adaptor.System parameters and personal maps editing with keypad thru 6 digits master PIN, also can be uploaded / downloaded via on-line PC. Multiple networking system can be configured to control up to 160 doors with supports of working with PCP832-XX multi-channel controller. Thousands access controllers system can be easily configured thru PC-T100 (TCP/IP converter) for Web networking.With 2-6 transparent user selectable duty keys and another two digits 79 user definable duty codes with duty description names. Duty code can be automatic shifted by 8 scheduled time zones.
With 168 time alarm for bell schedules and 96 holiday schedules.
With card valid time restriction function.With check repeat reading function to prevent repeating
reading within 1-9 minutes. With error message logging, such as: PIN error, card number error, invalid card, time zone mismatch, door monitoring time too long, alarm monitoring. Keypad lockable by master PIN and selectable Anti-duress code function to enhance security. Warning message “Ful 99%” prompt on LCD display for collecting data.Auto power reset with watchdog timer and low power RTC design, data retention for 10 years while power failure. Optional function: guard patrol function, digital door driver (DDR) |
| Specifications︰ |
|
Card type |
ISO 14443 Mifare A type card, or Keyfob |
|
Frequency |
13.56MHz |
|
On-line interface |
RS-232C, RS-422 or RS-485, TCP/IP
|
|
Baud rate |
300-115,200 bps, N,8,1 (default 4,800 bps) |
|
Card holders/events |
6,000 card holders / 8,000 events ( 256kb) ;
optional: 15,000 card holders / 32,000
events ( 4mb ) |
|
Indicators |
Bicolor (red/green) and amber LEDs,
multi-tone buzzer |
|
Display |
LCD module with 16 characters x 2 lines |
|
Mounting |
Surface mount with waterproof |
|
Enclosure material / color |
ABS / dark grey |
|
Keypad |
4 x 3 numeric keypad, waterproof |
|
Inputs |
3 inputs for external reader, push button,
door monitoring, burglar zone monitoring |
|
Outputs |
5 outputs for door release, alarm, printer
output, tamper switch, and door bell |
|
Power Supply |
12V DC, 150 mA (Linear
power supply recommended) |
|
Operation temperature |
-10°C ~ 55°C |
|
Humidity |
10%~90% RH, Non condensation |
|
Dimensions |
137(L) x 85(W) x 25(H) mm |
|
Weight |
340g±5% |
|
| **︰ | by Cindy
We reserve the right to change the specification without prior notice or obligation. |
|
|
|
