- Access control system with integral Proximity/RF/reader into one unit.
- Can be On/Off line use and external another reader for IN/OUT application.
- Up to 9,999 cards capacity for Access control function.
- Model: PUA-378 is Standalone type proximity card access controller.
- Model: PUA--377 is On-line type proximity card access controller.
|
|
|
|
| Features︰ | Access control system with integral Proximity/RF/reader into one unit.
Easy to install, low and designed for indoor or outdoor use.
Can be On/Off line use and external another reader for IN/OUT application.
Reading range from 5 to 15 cm.
Proximity reader to send out Wiegand/TTL/RS-485.
With tamper switch and two loop sensor inputs to trigger alarm as case is tampered or loop is intruded.
Programmable door release & monitoring time, error trials, alarm time.
Non-volatile EEPROM to store system parameters for 10 years.
Allow 3000 cards capacity based and expand 9,999 cards capacity for Access control function.
The Pegasus proximity readers are reading EM chip Pegasus PG-PROXC-DVP/44, PG-PROX-DVX/44 proximity card and PG-PROXKEY-D/44 proximity keyfob ... etc.
LED indicator to show the operation status.
With CPU watch-dog function to prevent malfunction.
PC-1037 Multi-doors controller can linking 4~20 units of PUA-377 to one PC host. |
| Specifications︰ |
| Dimensions |
116(L) x 76(W) x 13(H) mm |
| Weight |
250g |
| Frequency of Operation |
ASK 125KHz |
| Card holders |
3,000~9,999 cards |
| Type |
Surface mount, water proof |
| Monitor inputs |
Door contact, Exit push button, case tamper |
| Operation temperature |
-15°C ~
55°C |
| Humidity |
20%~90% RH, Non condensation |
| Power supply |
12 V
DC |
| Keypad |
With brief 3 x 4 membrane keypad for system programming and password entry |
| Interface |
RS-485 or Wiegand output or TTL(optional) |
|
| **︰ | We reserve the right to change the specification without prior notice or obligation. |
|
|
|
