- For Mifare (ISO14443A) cards and keyfob
- Single door and networking multi-doors access controller through RS-422/RS-232C/RS-485
- Operation modes: RF only, RF with PIN, door code only, free access
- 9,999 card holders / 6000 events for access and/or time attendance application
- PM-3760M0 reading Mifare card UID(serial number).
- PM-3760M1 reading Mifare card sector / block.
|
|
|
|
| Features︰ | Varied versions for access and time attendance applications.
With tamper switch and two loop sensor input to trigger alarm when case is tampered or loop is intruded.
Could retain events, personal maps and real time clock for 10 years as power failed.
With build-in RS-232C / RS-422 / RS-485 and optional TCP/IP interface to configure PC controlled networking systems through Pegasus PCP-832-XX multi-channel controller.
With built-in reading module and could link with one or two external readers ( PUA-310/M etc.) for IN / OUT access control.
With built-in quartz real time clock for time zone control & time recording.
Totally 144 bell schedules ( 6 schedules per hour ) for time attendance and 365 holidays control for national holidays / vacations for access control.
Card add/delete can be executed differently block by block for CARD or CARD & PIN, or PIN only from person to person. |
| Specifications︰ | Mounting: Surface mount
On-line interface: RS-232C, RS-422 or RS-485, TCP/IP
Transmission rate: 300-19,200 bps, N,8,1 (default 4,800 bps)
Passcode: Programmable 4 digits PIN. for each person
Cards: ISO 14443 Mifare A type card
Display: With 16 x 2 lines LCD to display weekday, time, ID number, date, buffer counter...etc
Keypad: 4 x 3 metallic or membrane keypad for system programming, pass word entry or duty code *selection
Reset: Watchdog timer, power on reset, self recovery watchdog ( optional)
Indicators: LED's ( one bicolor and one yellow ) and buzzer for sound indication
Inputs: Exit, Door sensor, two Wiegands port
Outputs: Door, alarm relay drivers, one wire serial output (open collector / RS-232C selectable) printer, multiple relays driving
Power input / current: 12V DC / 130mA with LED back lighted
Operation temperature: -10°C ~ 55°C
Humidity: 20%~90% RH, Non condensation
Dimensions: 174(L)x 100(W)x 45(H)mm
Weight: 740g
Operation modes: RF only, RF with PIN, door code only, free access.
For further system configuration and complete function codes, please refer to Pegasus technical datasheet.
Mifare® is a registered trade mark of Philips. |
| **︰ | We reserve the right to change the specification without prior notice or obligation. |
|
|
|
